This Bondtech CHT BiMetal RepRap M6 nozzle increases the melting capacity of your hotend, to build fasterand to save your time. It also improves the layer adhesion of your 3D prints to create stronger parts. Important to notice this nozzle is resistant to particle or fiber loaded abrasive materials.
Find the compatibility list and product alerts tabs below.

Features:

• Copper body;
• Hardened Steel inserts;
• Nickel Coating;
• 1 unit per pack;
• Available sizes : 0.40, 0.60, 0.80, and 1.0mm;
• Optimized for 1.75mm filament;
• Compatible with 2.85mm filament.
• Requires 6mm wrench

30% gains or more!!?? Check the White Paper:

“Increasing Melt Capacity With 3 Nozzle Features”

Gains apply to 1.75 / 2.85mm rigid materials and 2.85mm flexible filaments only.

To achieve meaningful volumetric flow gains use at least 0.6mm diameter nozzles.

Main Bondtech CHT Advantages

• Higher melt capacity by increasing the surface area of the heating walls
• Affordable price
• Machined with ultra-precision
• Brass nozzle with Nickel coated surface
• Follows nozzle standards:
  • RepRap (M617.512.5)
  • MK8 (M61513)
  • Volcano (M6114.521)
• May be used with 1.75 or 2.85mm hotends.

Advantages of the Bondtech CHT technology:

Bondtech CHT nozzles split the filament into 3 thinner strands allowing to melt the material from within. In doing so, the material melts faster and higher flow rates can be used.

Advantages of the Nickel Coating

A Nickel coating is applied to our Coated Brass nozzles to provide protection against corrosion, erosion, and abrasion. Nickel coated nozzles have more corrosion resistance and lower coefficient of friction, which allows slicker feeding of material and delays plastic adhesion to the nozzle’s surface.

Different nozzle sets for different materials

We recommend you to have several sets of nozzles because:
Using different materials with the same nozzles causes deposit build-up inside the nozzle.
These deposits will cause blockages.
We recommend changing nozzles when changing materials.

Technical Data Sheet