Specifications

• Gasket Mount 6063 Alu case
• 6 Typing Angle
• Type-C and Wired
• Hotswap PCB with USB-C daughterboard
• PC plateflex cut design)
• QMK/VIA Supported
• ANSI Layout
• Support PCB stabilizers
• Poron Dampening pads

Quality Disclaimer

1. Appearance QC standards (including PVD brass weight, Alu weight) are as follows:
According to QC standard, our QC is in the light conditions are normal, and keep the distance between 20-25 cm to check the keyboards appearance. If there is no defect then the QC check is passed.
If the keyboard has problems such as dirt/spot/trachoma, as long as the dirt/spot/trachoma is less than 0.8-1.2 mm (check with a film caliper), the QC check will pass. You can view the table of QC standards for dirt/spot/trachoma.

2. Plating marks caused by hanging holes inside during keyboard production are normal phenomena during production.

3. Due to the special material properties of brass PVD, there may be slight, unavoidable dust on the mirror surface during production. These are normal phenomena and within our quality approval range.