The SV08 is a great printer, the one thing that isn’t that great though is that inductive probe that it comes with. Experience a much better probing and bet leveling experience with the Eddy Current Probe specifically designed for the SV08.

Package Contents:

• Eddy Current Module 1
• Nozzle Cleaning Module 1
• Printhead Cover 1
• ST-LINK Programming Kit 1
• USB Drive 1
• ST-LINK Programming Cable 1
• User Manual 1
• Silicone Cleaning Brush 1
• Screws, Screwdriver, Cable Ties, etc.

Compatible Model:SV08 (*not compatible with other models)
Control System:Klipper only, not compatible with Marlin

Purchase & Usage Notes

1. This kit canonlybe used on theSOVOL SV08 and SV08 MAXprinter. It cannot be installed on other Sovol models or on other brands of printers.
2. The nozzle cover included in this kitmust be used, otherwise the kit cannot be installed.
3. To use this kit, the SV08 printer firmware must be updated (refer to the manual or tutorial video for the firmware update guide).
4. The Eddy Current Module PCB board cannot be installed or used on theSOVOL ZERO.
5. The Eddy Current Scanning Kitmust be used with a metal build plate. It cannot be used with carbon-silicon glass plates, fiberglass plates, or other non-metal build surfaces (no issue when used with the original SOVOL SV08 build plate).
6. The Eddy Current Kit cannot be used on a heated bed with a strong and uneven magnetic field, as it may prevent the Eddy Current Module from functioning properly (no issue when used with the original SOVOL SV08 heated bed).
7. This product requires a Windows computer to update the firmware.

Installation Guide Video